Spring 2015 (Intern)
- Courses: None
- Submissions: None
March 13
- We arrived in Canada on 3rd, March and it took us about a week to settle in, thanks God.
- We started our work full load on 11th, March. We had two remaining things to do; first, to implement the smooth handover part of the fault tolerance algorithm. We have done it. Second, to fine tune the settling time of the system with the delay compensator. We have done as much as we can in this, but still the settling time is longer than that in the transaction paper.
March 20
- We had a brief meeting with Dr. Tamir and showed him the results of the delay compensator and the fault tolerance implementations. They were fine. The only drawback is the ripples that appears in the response of the system with the delay compensator for the high delay values.
- We are now working on finding a new physical system for our work. We discussed the criteria of choosing such system with Dr. Tamir. Besides, we also search for an open source SCADA/HMI for our system.
April 3
- We made a list of the physical systems that can suit our work. We are also in contact with the manufacturers of these systems to know about their prices(the prices are not available online) to find a system that fits our estimated budget.
- We made a final list of 3 open source SCADA/HMI software that can be used for our work. We will discuss with Dr. Tamir to find the most suitable one.
- We started working on the implementation of the PID controller with the bumpless transfer. After finishing this part, we should start implementing the fault tolerance algorithm.
