Nokia S60 Platform battery monitor tool

Cell phone OS requirement:

Have to be S60 3rd Edition, Feature Pack 1 (or newer). Currently only Nokia N96 in the lab can run this software

1. Connect the device to a PC using a USB cable.

2. Select the PC Suite mode for USB connection.

3. Double-click the SIS package in PC Suite.

4. Answer Yes to the installation confirmation in the PC.

5. Follow the screen instruction to finish the installation.

1. Shows the power consumption over a measurement period. The basic unit is a watt (W). The user can switch between average and instant power.

2. Displays current consumption which is calculated by the measured power divided by the measured voltage.

3. Shows the CPU load over a measurement period as a percentage of the total available processing capability. Values are between 0 and 100%

4. Displays the RAM memory usage over the period. The units are KB and MB.

5. Presents the downlink (download) and uplink (upload) speeds through the IP stack (Internet Protocol). The unit is KB.

6. Shows the cellular signal levels as RX and TX levels. RX level corresponds to the power of the received cellular signal.

7. Shows the cumulative energy consumed over the measurement period. The unit is ampere-hour (Ah)

8. Shows the battery voltage levels over a measurement period.